Mofeez 77080 19mm Harmonic Balancer Socket Compatible with Honda

Awesome socket! It's used to remove harmonic balancer bolt from honda engines without a special balancer tool. With it being 3x the weight of a normal socket, it has the force to remove balancer bolt with ease. Works exactly as it was designed.

This socket worked exactly as described. It is low grade finish as its simply painted, and I was concerned about a slightly loose fit, however I believe that is one of the designed in features. It allowed my electric impact to "hammer" the crank bolt off easier. It works like a sledge socket I like to think. On a non corroded 2004 CRV , I cleaned all the oil spill off first then sprayed the crank bolt wd40, 3 min later hit it with a Milwaukee fuel 18v 1/2 drive 600 FT lb + impact and it removed the crank both it about 8 seconds of impacting. Keeping this tool forever!

I had a pulley bolt on a Toyota minivan that was not coming off. I was bending metal and trying everything. I bought an impact wrench and used a regular socket and the bolt would not budge. I saw a video on these and it explained the extra mass of the socket is what gives it power. I had no choice so I bought one. I had failed so many times that I had my reservations about this. I tried it and it got the bolt off very easily. It was great for tightening it back on too. Well worth the money.

It worked as stated

I’m not a professional that would use this regularly. I don't want to spend money on a tool to use one time. This worked great for getting the Honda crank bolt loose. I used it with Milwaukee impact.

Terrible quality. I should've listened to the other reviewers when they mentioned that the socket rust out over time..QUICKLY It also rounded off after several uses. Didn't last long. very disappointed. I brought the Lisle crank socket and it's going just as strong and longer. No rounding as of yet. I don't recommend this socket.

If you are tearing down a k series just do it bro. Trust me. Just do it lol

I could not get the crank pulley bolt to break loose, (older Toyota 3MZ v6) read a couple of reviews and it was briefly mentioned in a YouTube video. It broke loose with less than 10 seconds of running the 1/2” drive - after many attempts, heat, 3/4” breaker bar etc. 19mm High mass impact socket is a winner.

No está fabricado de un material duro por lo que al estarlo utilizando el dado comienza a abocardarse, me parece de mala calidad.

It didn't work. Been using penetrating oil for a couple of days before i started removing the crankcase pulley bolt.In theory it seems to make sense. I used a breaker bar with an extention & hitting the handle with a small sledge hammer!