DIY Craft Magnetic Sheets with adhesive backing - 8x10" 5 pack Adhesive Sheets for Magnetic Stickers and Photos - 100% Customizable

I liked everything about these sheets, as well as the ease in the transaction. They are very lightweight, thin but not paltry, extremely durable and magnetic, and probably can be used for a zillion things. Myself, I attach decals to them after I cut them to size, very easily, a single sheet can produce three or four no problem depending on the size of your decal, and then attach to my car. they can then be pulled off at will, and leave no mark on my bumper. No worries as to adhesive, that would be used if only using the decal, wearing thin after mounting, since it adheres through magnetism. To address weather issues, I also apply an adhesive sheet of clear plastic, cut to the same size over the finished decal and voila! The extra plastic to cover would be unnecessary if used on anything other than something that will encounter adverse weather, i.e. fridge magnet etc. I finish the entire decal/magnetic sheet/plastic coating and then bring out the finished product and place it on my car bumper. Sticks great, looks stupendous, leaves no mark, and weatherproof. I can imagine all kinds of craft uses. Very pleased!!!

Works great with crafts! Sticks pretty well for intended use.

They work as advertised. Magnet strength is good.

I bought these to make fun magnetic bookmarks for holiday gifts and they work well on paper. They are easy to cut, easy to stick and easy to use in general. I like the flexibility of the product and that they come in a five pack. That will last me quite a while.I wanted to laminate the art I was using for my bookmarks and when I did that these magnets don't stick together as well. I wish they come in a higher strength for that reason. Overall, these are great, and I would recommend them, especially for the quality and price.

I like collecting stickers from various adventures, or favorite breweries etc. I don't however enjoy permanently sticking them to a surface and never being able to move it. I bought this material and it has worked awesome to convert my stickers to magnets! I also bought a nice post card from Hawaii and simply put it on this material to make a fridge magnet.Having glue on the magnet material doesn't impede the ability of your sticker to stick. It also allows you to stick anything else such as kids school photos, post cards, personal art, etc.

I initially bought these magnet sheets so that I could turn bumper stickers into magnets to put on my car. The sheets so far have held up, and nothing has fallen off of my car. The thickness of the sheets is just right, they're a bit thin, but I wouldn't want them to be thicker. The cost was great, as I didn't realize I was going to be getting five sheets of magnets when I ordered. The size of the magnet sheet doesn't really matter to me, as I'm able to cut down the excess. They also came with a set of scissors to cut the sheets with.

Great for magnet art

This sheets were purchased to keep small 2" x 1" make-up modules from moving around within a larger tray. The idea was to secure the magnetic sheet to the tray, adhere thin 1/4" metal washers to the modules which would then prevent them from moving but allowed for arranging and replacement when needed.First off, be advised, there are no instructions whatsoever with this product. It almost took a forensic examination of the folding scissors to figure out how to open them. Using the magnetic sheets itself is another issue which I will get into in a moment.I measured how big a piece was needed for the tray and tried to transfer the measurements to the back of the sheets so it could be cut. The backing is a vinyl type material and as such could not be marked in pencil or pen. I then used a permanent pen and even then it was a struggle to get the markings down.Once I did get the measurements laid out, I attempted to cut it out with a metal ruler and utility knife. Again the slickness of the backing material proved a hindrance as the ruler kept slipping making it hard to cut while maintaining the line. I finally got it cut after pressing down almost all my weight to keep the ruler in place.The backing was pulled and the sheet was placed in the tray. The adhesive is adequate for the purpose.I secured a washer to one of the modules with double-sided tape and placed it in the tray..., it slid right off. There was absolutely no adherence to the magnetic sheet. Thinking there was a problem with the washer, I tried it on a small magnet salvaged from a shower curtain liner. The washer immediately stuck to that magnet. I quickly found that metal of any kind will not adhere to these sheets.I was about to throw the whole thing away when I noticed how the sheets reacted with other sheets in the package and experimented with pieces of it.The magnetic sheets will attract to itself but there is a caveat. The magnet orientation between the two pieces must be specific. In one orientation, they will adhere. However, turn one of the pieces 90-degrees and you might as well try adhering two pieces of wax paper together.Even when you get the orientation correct, do not expect anything heavier than a sheet of lightweight paper to remain adhered on a vertical surface.Based on my experience and experimenting with this product, it is of such limited use that is in reality it is utterly useless.