GL.iNet GL-SFT1200 (Opal) Secure Travel WiFi Router, AC1200 Dual Band Gigabit Ethernet Wireless Network, IPv6 USB 2.0, Repeater Bridge Access Point Mode, Router for Public Use, Easy Setup with Guide

The router performance is about the same as the Tenda AC1200 AC8 it replaced. It does that with MUCH smaller antenna and only two of them compared with 4 antennae of the AC8. Prepare for very small fonts in the start up instructions! I did have an issue and needed to go online to the site for clarification. Possibly due to language differences there was confusion as to which password to enter into the router once it rebooted. Either the new router password or the host password. That was resolved and the router has run smoothly since 12/11/24. It was setup in our house but it will be transferred to an office environment shortly where its host and password will again be changed before it settles into service at that location. Based on its performance we ordered three more.This router was approved for use by our national organization. We also bought the carry cases for them as Amazon offered a case designed for this router. We do need a case to protect the router when not in use. If you use "WISP" mode to connect to the host wirelessly this router does not have one. Its equivalent mode is "Repeater" and it works the same as WISP as it connects to the host and on to the Internet in our case. We have not used the router in any other mode, however we expect that it will meet our expectations. There are two LAN and one WAN port along with a 2.0 USB port. With its small size we may use a switch for allowing access to other devices. A four port switch device is very light and won't interfere with portability this router affords. The color blends in very well with our office surroundings. The AC8 was only offered in black or white colors and with 4 large antennae it did not blend in very well. Packing it for travel or storage was very annoying. This Opal router works well and has side benefits. The antennae design worked well in a TP-Link access point we used several years ago. The Internet speed test we ran did not differ very much from the AC8 design so we expect about the same performance from this smaller unit as compared to the larger Tenda AC8 design. I also bought one for our house. A nice touch was the power supply and cord. Both match the unit color and the plug has a unique design. The cord is a flat design that FOLDS very nice within itself. I am NOT going to purchase round cords any longer. When one coils (folds) this cord just follow the contours that you see when you first look at the unit in the box. You can then fold it back into the same size. I took a photo of it so I could refold it correctly and it DID! A nice small package without using an elastic. Its funny how the little things add up to a nice design. The Gli folks have a nice design throughout the product. Even the box design is very well done. BTW the route unit takes up about 1/2 the box and the cord and power supply take up the other half. The router is in a soft sleeve and one will realize it is only 1/2 of the box size. The plug of the power cord will need a 10 second assembly.It seems to be a universal plug that allows the unit to adapt to US, EU and other electrical systems. The contacts assembly are separate from the remainder of the cord assembly. The instructions indicate how to connect the contacts to assemble it to the cord unit by aligning the contact unit with the cord unit and then clicking the two into place with a slight twist of the wrist. Sounds complicated BUT it is like aligning an aspirin bottle top with the bottle edge and slightly twisting the top on. The U.S. model has a standard U.S. plug contacts. The units going to the EU probably have the EU type contact assembly. Slick!We do not need speed greater than the AC1200 standard right now. However, if we need more speed or more features the GLi company will be the first place we will look. GLi put a lot of thought into their design and it makes me confident that their electronics are designed with the same care and detail.

perfect for stubborn hotel wifi that doesn't allow roku devices to show on the network. Now, probably don't get it if you're looking to use a hotel wired connection, I'm not sure if that is just a myth, as the wired internet connection at an Embassy suites was not active. However if you connect your hotel wifi thru this and the app, my roku device was able to get on on problem. It's a little tricky to set up at first, my tip is to once you log on to the device via wifi, look for a message on your phone that says no internet connection click here to set up. Once you establish that, you can then use the IP address provided in the instructions to set the rest up. The app on from the ip address will also instruct you to connect if you need to enter hotel credentials to connect to their wifi.

We don't have internet service at our shore house but we do at our main home, so we needed something that could rebroadcast the Xfinity hotspot. As you might know, this is not possible on most routers because the hotspot is not password protected, but only serves a login portal until you actually login. So it seems like you have Internet access, but you don't into you're logged in. This router does support this, so I simply connected to the hotspot, logged into the portal in the app, and voila - done. The entire house has a strong WiFi signal that all devices can now use. I couldn't be happier with this little guy!

I'm a little skeptical a out the 5ghz radio.My current setup is in my RV with this used as an access point to my wired router with Starlink.I have the wifi 2.5 and 5ghz seperated because of some older devices that wont connect to the combined setup.I've noticed throughout the day if i do a speedtest to fiber test servers I get speeds of less than 60 mbps while on the 5ghz. I will then toggle to the 2.4 ghz and back to the 5ghz and the speedtests are now where they should be at 260 mbps+.I've found myself having to do this multiple times throughout the day doing speed tests.I have both radios on max power and have adjusted the 5ghz frequency all over the operating spectrum with the same results.Don't know what to make of it.Other than that, the router seems to be capable of great stuffUpdate... Replacement ordered. 2.4ghz and 5ghz both throttle down to 20-30 mbs download after awhile. Could be 5 minutes or 2 hoursBoth have to be toggled or disconnected and reconnected to regain full capable download speeds. I have adjusted and locked each frequency on specific channels. Tried disabling and re enabling certain bands. Changing power supply cords. Swaped the cat 6 cables from wan to lan and back again. Used different cables. Firmware downgrades and upgrades. I have tested every changable option in the Luci advanced settings for the wifi. Absolutely nothing fixed this issue. Im hoping this was just a dud router

Why did you pick this product vs others?:I bought this a couple years ago and have been using every time I traveled. It has been great. I only had to set it up once and every time I get to the hotel, just connect it to the hotel’s wifi and it is good to go. I just ordered a other one for my friend since he has been traveling lately. It is better to have a private network.

Super easy to setup. The big difference between this one and other models of similar price is that this one is capable of receiving and broadcasting 2.4ghz AND 5ghz. For my specific use case I was looking to pick up a 5ghz signal that requires a login (so need full router mode and not just an extender) and then rebroadcast it as a 5ghz and 2.4ghz signal. This let me accomplish just that and I had it setup in less than five minutes. I've got sixteen devices connected to it, and all are connected fine, no issues!