RXFSP 6 GPU Aluminum Stackable Open Air Mining Computer Frame Rig Ethereum Veddha with 5 Fans

Let me start by saying that I kept this frame even after the issues I'm about to detail. It was more important to me that my hardware was protected and running than getting a different frame, especially since the lead time is 2wks+.The instructions are IKEA-style, so diagrams only. I like this style sometimes, but these instructions missed many perspective lines that made it difficult to understand the orientation of some parts. Fortunately, there's only so many ways it can go together. Also, it came with some standoffs, finger-bolts, and 2 other standard bolts, but didn't mention which bolts go where and I only ended up using the black bolts - It hasn't fallen apart so I think I'm in the clear.Structurally, it 's holding up fine (if a metal box-frame cant hold a couple computer parts, I don't know what to tell you). My issue here is the quality isn't up to par. there were chips/scratches in the coating, the bolt holes weren't tapped well, and several pieces didn't line up well - the bolt holes on the bracket directly under your GPU was about 0.25 inches off , so I had to bend the frame to get them to line up.Compatibility-wise, it held my motherboard and PSU. It did not hold the fans, GPU, or SSD. The BeQuiet! fans I purchased don't work with the yellow plastic fan mounts. I ended up buying aluminum angle and making brackets for them. The bracket under the GPU sits directly under my GeForce RTX 3070's interface, so I couldn't connect without relocating that bracket, i.e. drilling new holes and adding more aluminum angle. Lastly, there's no provided location to mount the SSD. Once I do some cable management, I'll find a good location to put it and drill more holes.I'm hoping some of these issues were errors on my end, but unless you really like the aesthetic appeal of this one and don't mind modifying it, I would recommend a different frame.

comes with all the necessary parts and assembles nicely. Holds my 6 5700 XT's quite well.

This is a good rack. Easy to put together. Screw holes exist for the motherboard, power supplies and cards. This comes with screws. If you get the version without fans it still includes the pieces to make the fan row with your fans. There is a power switch that not all racks have. For oversized cards it’s a bit tight. Gigabyte visions which are long and thick barley squeeze in. The back of the cards are against the fans and only a bit of space in between. Combine that with Gigabytes cooling issues and it’s not ideal. But overall, I like the rack and would buy again.I would suggest adding holes to add another row of fans in the front as cooling is a major issue on any rack.

Can’t assemble because it came with the wrong materials. There are supposed to be two FS07 rails but instead there are two FS08 and ONE FS07.

It was a project but went together and works

This frame is pretty good. The instructions were a little confusing but once you get it together, it looks like it can hold up for a long time. The only complaint is that the few larger cards (ie 3080/90 Strix OC at 319 mm) do not fit without putting a slight bend into the fan line.